Roanoke, VA Plumber | Call (540) 302-5580Roanoke, VA Plumber | Call (540) 302-5580Faucets, sinks, toilets, tubs, and showers installed — with shutoff valve replacement in older homes where the valves won't hold.
Call now — describe the project and we'll call back with a ballpark price.
Fixture Installation
We install faucets, sinks, toilets, tubs, and shower fixtures throughout Roanoke, VA. Installation in older Roanoke homes — the railroad-era neighborhoods of Old Southwest, Wasena, and Grandin Village especially — often requires replacing the shutoff valve under the sink or behind the toilet at the same time, since original galvanized angle stops from the 1960s and 1970s can't fully close and won't safely hold during a fixture swap. We assess and handle that as part of the job, so there are no surprises mid-install. If you need toilet repair rather than a new installation, see our toilet repair page.
This is the most common complication we encounter in Roanoke's older housing stock, and it's one the competitors who serve this market rarely explain upfront. In homes built through the 1970s — and there are many in Roanoke's established neighborhoods — the angle-stop shutoff valves under sinks and behind toilets are often original. These are the small valves you turn to shut off water to a single fixture.
Galvanized angle stops that have sat in the open position for thirty or forty years corrode internally. They look fine until someone turns them. At that point, one of three things happens: the valve won't close fully and water keeps trickling through; the valve seizes partway and can't be turned further; or the packing nut develops a new drip. None of these is a disaster, but all of them mean work can't safely proceed on a line you can't stop. The repair is a new quarter-turn ball valve — durable, easy to operate, lasts decades — but installing it means shutting off the main water supply to the house for the duration.
We identify this risk before the job starts and include valve replacement in the quote if needed, so you're not surprised. In homes where multiple shutoffs are original, it can be worth replacing them all in one pass — which overlaps with our repiping services conversation. That way the next time any fixture needs work, the valves are reliable.
Roanoke sits in a river valley surrounded by the Blue Ridge, and the city's water system serves significant elevation differences — from the lower valley floor to the ridges above Old Southwest and the higher parts of Cave Spring and Hollins. This means water pressure varies noticeably by neighborhood and by the specific location of a home on a street.
Pressure matters for fixture selection. A rainfall showerhead rated for 60 PSI will underperform in a home at high elevation where pressure runs 40 PSI. Conversely, homes close to a main pumping zone can see pressure above 80 PSI, which is above the range most fixtures are designed for and can shorten their lifespan. Before installing a new shower valve or a multi-function showerhead system, we check the static pressure at the supply so you're not installing a fixture that will disappoint at the pressure your home actually sees. If pressure is consistently high, a pressure-reducing valve (PRV) at the main can protect every fixture in the house — worth noting if you're doing a bathroom renovation anyway.
If you suspect a leak at or near an existing fixture after installation, see our leak detection page — we can pinpoint the source without opening walls unnecessarily.
Not every dripping faucet or running toilet calls for full replacement. A faucet with a worn cartridge or O-ring can often be repaired for a fraction of the cost of a new fixture. A toilet that runs constantly usually has a failed fill valve or flapper — a quick fix. Replacement makes more sense when the fixture is very old, the repair parts are no longer available, or the fixture is already damaged beyond the component that failed.
We'll tell you which approach makes sense for your situation. For toilet-specific repairs — running toilet, leaking base, phantom flush — our toilet repair page covers those in detail. When a faucet repair turns into a larger fixture issue, we can discuss replacement at the same visit.
In most cases a faucet can be replaced without replacing the entire sink. The exception is when the sink itself is damaged — cracked porcelain, corroded basin, or mounting holes that don't match the new faucet configuration. In older Roanoke homes, the main complication is usually the shutoff valves under the sink: galvanized angle stops from the 1970s or earlier often won't fully close when turned, which makes any under-sink work riskier. We assess the valves as part of the job and replace them if they won't hold. Call (540) 302-5580.
A toilet replacement involves removing the old unit, inspecting the flange and the floor around it for rot or damage, setting the new toilet on a new wax ring, securing and connecting the water supply, and verifying the supply valve closes fully. In older Roanoke homes, the supply shutoff behind or beside the toilet is often original — a corroded angle stop that won't fully close — and we replace it at the same time. The job typically takes under two hours when the flange is sound. If the flange is damaged or corroded (common with cast-iron closet flanges in older homes), that's an additional repair. For running, leaking, or repairing an existing toilet rather than full replacement, see our toilet repair page. Call (540) 302-5580.
Shutoff valves in Roanoke's older homes — especially the galvanized angle stops and gate valves common through the 1970s — corrode internally over decades of sitting open. They look fine until you turn them, at which point they either won't close fully, seize partway, or develop a new leak at the packing nut. Discovering that during a fixture swap is a problem, because work can't proceed safely on a line you can't stop. The fix is straightforward — a new quarter-turn ball valve — but it means turning off the main water supply to make the swap, which we do as part of the job. In homes where this is a pattern across multiple fixtures, it's worth discussing whether the supply valves throughout the house should be replaced at the same time. Call (540) 302-5580.
A straightforward faucet replacement runs $100–$250 in labor, depending on access and whether the existing shutoffs are functional. A toilet replacement is typically in the $150–$300 labor range, not including the toilet itself. Tub and shower fixture replacements vary more widely — a single-handle cartridge swap is quick; a full tub or shower valve replacement with surround work is a larger job. The main variable in older Roanoke homes is whether the shutoff valves need to come along, which adds a small amount. We give you the full number before starting. Call (540) 302-5580.
Ready to get started? Call (540) 302-5580 for a free, no-obligation estimate on fixture installation anywhere in Roanoke County.
More Services
Running toilets, leaking bases, phantom flush, or cracked bowls — diagnosed and fixed correctly the first time.
Learn more →Old galvanized or failing interior pipes causing low pressure or discolored water? We repipe Roanoke homes with minimal disruption.
Learn more →Hidden leaks behind walls and under slabs located with modern equipment before they become expensive disasters.
Learn more →The service line from the WVWA meter to your house — diagnosed, permitted, and replaced when it fails.
Learn more →Burst pipes, flooding, sewage backups — fast dispatch across Roanoke and Roanoke County with callbacks from a local plumber.
Learn more →Our Service Area
Fastest answer: call (540) 302-5580. Or send the form and we will get back to you.